An industrial chemical metering pump, available in simplex, duplex or triplex configuration.
• Capacities to: 2400 GPD (per head)
• Pressures to: 290 PSI
• 5-year diaphragm warranty
• Available PVC & Stainless Steel Heads
• Multiple Head Capabilities
Series E25000 Chemical Metering Pump
FRAME AND GEARBOX
The pump features a mechanically linked diaphragm, driven by an oil immersed worm/wheel reduction gearbox, which in turn, is driven by a close-coupled electric motor. The pump utilizes a rigid, one-piece cast iron frame to ensure rigidity between all components. The frame is provided with an oil drain and separate oil fill/breather. The oil fill is positioned so that oil is added until it overflows; the oil level is then at the correct operating level and cannot be overfilled. The four integrally cast hold down feet are machined so that the pump is ready for mounting.
SOLUTION HEAD
Six sizes of solution heads combined with 5 stroking rates result in the pump having a capacity range from .76 to 7304 GPD (0.12 to 1152 liters/hour) in triplex design, with discharge pressures to 290 PSI (2000 kpag), depending on head size and material. Head materials in PVC, POLYPROPYLENE and 316SS in conjunction with a PTFE diaphragm mean that the pump is able to handle a wide range of industrial chemicals.
VALVES
The 2500 Series utilizes screw in valves in the same materials as the solution head. A variety of ball check materials including stainless steel, ceramic, Pyrex, PTFE and Hastalloy. The valve assemblies are fully serviceable with all components being replaceable. For products with a high viscosity such as polymer solutions, the valves are available with springs to assist in positive valve operation.
CAPACITY CONTROL
The pump's output can be manually adjusted via a precision micrometer adjustment set to operate between 10-100% of the pump rated capacity. A variable speed controller used in conjunction with the standard 3-phase motor can also be used to operate the pump between 20-100%. The variable speed controller can accept a 4-20 mA signal from an external process controller to provide automatic capacity adjustment control.
DRIVE MOTOR
The 2500 Series pump is available as standard with a 1/2hp, 1-phase, 115/208-230 VAC, 60hz 1725 rpm, TEFC industrial motor suitable for outdoor industrial use. Optional 3-phase or DC motors are available on request.
WARRANTY
Each pump has a full 1-year warranty from date of shipment. The Diaphragm has a 5-year warranty from date of shipment.
Should you have any questions, please do not hesitate to contact us at (215) 453-2533.
SERIES E25000 DATA (BASED ON 60 HZ)
Red type indicates variation among Head Sizes
Head Size: 001
Maximum Rated Capacity / GPD ( L/HR )
(55.2 SPM @ 60Hz): 10.14(1.6)
(86.4 SPM @ 60HZ): 15.21(2.4)
(110.4 SPM @ 60Hz): 19.65(3.1)
(134.4 SPM @ 60Hz): 24.10(3.8)
Maximum Allowable Discharge Pressure / PSI (kPag )
Plastic Head: 200 (1400)
Metal Head: 290 (2000)
Valve Arrangement: Double
Maximum Allowable Material Temperature Limit / F/C
PVC: 158F / 70 C
PPL: 176F / 80 C
PVDF & PTFE: 212F / 100 C
All Metals: 212F / 100 C
Accuracy / % of Rated Value
Repeatability (Over A 10:1 Turndown Ratio ): symbol 177 \f "Symbol" \s 7 1%
Micrometer Stroke Adjustment Resolution: % of Rated Capacity
All Head Materials: 10%
Available Stroking Rates: Strokes Per Minute (SPM)
For All Sizes Except as Noted: 55,86,110,134
Displacement Capacity per Stroke @ 100% Adj. (ml): 0.47
Nominal Stroke Length (mm): 1.57
Standard Connection Sizes: Nominal Size NPT Female
SUCTION: ½"
DISCHARGE: ½"
Head Size: 002
Maximum Rated Capacity / GPD ( L/HR )
(55.2 SPM @ 60Hz): 48.82(7.7)
(86.4 SPM @ 60HZ): 76.09(12.0)
(110.4 SPM @ 60Hz): 97.65(15.4)
(134.4 SPM @ 60Hz): 118.57(18.7)
Maximum Allowable Discharge Pressure / PSI (kPag )
Plastic Head: 200 (1400)
Metal Head: 290 (2000)
Valve Arrangement: Single
Maximum Allowable Material Temperature Limit / F/C
PVC: 158F / 70 C
PPL: 176F / 80 C
PVDF & PTFE: 212F / 100 C
All Metals: 212F / 100 C
Accuracy / % of Rated Value
Repeatability (Over A 10:1 Turndown Ratio ): symbol 177 \f "Symbol" \s 7 1%
Micrometer Stroke Adjustment Resolution: % of Rated Capacity
All Head Materials: 5%
Available Stroking Rates: Strokes Per Minute (SPM)
For All Sizes Except as Noted: 55,86,110,134
Displacement Capacity per Stroke @ 100% Adj. (ml): 2.3
Nominal Stroke Length (mm): 3.17
Standard Connection Sizes: Nominal Size NPT Female
SUCTION: ½"
DISCHARGE: ½"
Head Size: 005
Maximum Rated Capacity / GPD ( L/HR )
(55.2 SPM @ 60Hz): 91.31(14.4)
(86.4 SPM @ 60HZ): 144.57(22.8)
(110.4 SPM @ 60Hz): 182.62(28.8)
(134.4 SPM @ 60Hz): 228.27(36.0)
Maximum Allowable Discharge Pressure / PSI (kPag )
Plastic Head: 200 (1400)
Metal Head: 290 (2000)
Valve Arrangement: Single
Maximum Allowable Material Temperature Limit / F/C
PVC: 158F / 70 C
PPL: 176F / 80 C
PVDF & PTFE: 212F / 100 C
All Metals: 212F / 100 C
Accuracy / % of Rated Value
Repeatability (Over A 10:1 Turndown Ratio ): symbol 177 \f "Symbol" \s 7 1%
Micrometer Stroke Adjustment Resolution: % of Rated Capacity
All Head Materials: 5%
Available Stroking Rates: Strokes Per Minute (SPM)
For All Sizes Except as Noted: 55,86,110,134
Displacement Capacity per Stroke @ 100% Adj. (ml): 4.4
Nominal Stroke Length (mm): 3.17
Standard Connection Sizes: Nominal Size NPT Female
SUCTION: ½"
DISCHARGE: ½"
Head Size: 015
Maximum Rated Capacity / GPD ( L/HR )
(55.2 SPM @ 60Hz): 281.53(44.4)
(86.4 SPM @ 60HZ): 441.32(69.6)
(110.4 SPM @ 60Hz): 563.07(88.8)
(134.4 SPM @ 60Hz): 684.81(108)
Maximum Allowable Discharge Pressure / PSI (kPag )
Plastic Head: 180 (1250)
Metal Head: 180 (1250)
Valve Arrangement: Single
Maximum Allowable Material Temperature Limit / F/C
PVC: 158F / 70 C
PPL: 176F / 80 C
PVDF & PTFE: 212F / 100 C
All Metals: 212F / 100 C
Accuracy / % of Rated Value
Repeatability (Over A 10:1 Turndown Ratio ): symbol 177 \f "Symbol" \s 7 1%
Micrometer Stroke Adjustment Resolution: % of Rated Capacity
All Head Materials: 5%
Available Stroking Rates: Strokes Per Minute (SPM)
For All Sizes Except as Noted: 55,86,110,134
Displacement Capacity per Stroke @ 100% Adj. (ml): 13.4
Nominal Stroke Length (mm): 6.35
Standard Connection Sizes: Nominal Size NPT Female
SUCTION: ½"
DISCHARGE: ½"
Head Size: 025
Maximum Rated Capacity / GPD ( L/HR )
(55.2 SPM @ 60Hz): 502.19(79.2)
(86.4 SPM @ 60HZ): 786.26(124)
(110.4 SPM @ 60Hz): 1001.85(158)
(134.4 SPM @ 60Hz): 1223.78(193)
Maximum Allowable Discharge Pressure / PSI (kPag )
Plastic Head: 125 (850)
Metal Head: 125 (850)
Valve Arrangement: Single
Maximum Allowable Material Temperature Limit / F/C
PVC: 158F / 70 C
PPL: 176F / 80 C
PVDF & PTFE: 212F / 100 C
All Metals: 212F / 100 C
Accuracy / % of Rated Value
Repeatability (Over A 10:1 Turndown Ratio ): symbol 177 \f "Symbol" \s 7 1%
Micrometer Stroke Adjustment Resolution: % of Rated Capacity
All Head Materials: 5%
Available Stroking Rates: Strokes Per Minute (SPM)
For All Sizes Except as Noted: 55,86,110,134
Displacement Capacity per Stroke @ 100% Adj. (ml): 24.0
Nominal Stroke Length (mm): 6.35
Standard Connection Sizes: Nominal Size NPT Female
SUCTION: ½"
DISCHARGE: ½"
Head Size: 050
Maximum Rated Capacity / GPD ( L/HR )
(55.2 SPM @ 60Hz): 989.17(156)
(86.4 SPM @ 60HZ): 1547.16(244)
(110.4 SPM @ 60Hz): 1978.34(312)
(134.4 SPM @ 60Hz): 2409.51(380)
Maximum Allowable Discharge Pressure / PSI (kPag )
Plastic Head: 100 (700)
Metal Head: 100 (700)
Valve Arrangement: Single
Maximum Allowable Material Temperature Limit / F/C
PVC: 158F / 70 C
PPL: 176F / 80 C
PVDF & PTFE: 212F / 100 C
All Metals: 212F / 100 C
Accuracy / % of Rated Value
Repeatability (Over A 10:1 Turndown Ratio ): symbol 177 \f "Symbol" \s 7 1%
Micrometer Stroke Adjustment Resolution: % of Rated Capacity
All Head Materials: 2%
Available Stroking Rates: Strokes Per Minute (SPM)
For All Sizes Except as Noted: 55,86,110,134
Displacement Capacity per Stroke @ 100% Adj. (ml): 47.1
Nominal Stroke Length (mm): 7.92
Standard Connection Sizes: Nominal Size NPT Female
SUCTION: ½"
DISCHARGE: ½"
American Made Product